ProNature Wood Reviver Kit

Coverage & Application

Content:

ProNature Wood Cleaner & ProNature Wood Reviver.

Surface Preparation:

Clean surface of loose dirt. Scrub with a stiff bristle brush to remove intense dirt such as algae etc.

Application – Step 1:

• ProNature Wood Cleaner is ready to use. Do not dilute.
• Moisten wood.
• Apply ProNature Wood Cleaner with a sponge or cloth.
  Allow product to draw into wood for 2-3 minutes.
• Use stiff short-bristle brush or scrubbing pad if necessary.
  Rinse with clean water.
• Severely dirty or weathered wood may require a second treatment until wood shows its natural colour and grain.
• If sanding is required, this should be done before application of ProNature Wood Reviver.

Application – Step 2:

• ProNature Wood Reviver is ready to use. Do not dilute.
• Allow wood to dry slightly
• Apply ProNature Wood Reviver with a sponge or cloth (we recommend to use rubber gloves)
• Allow product to penetrate for at least 5 minutes.
• Rinse thoroughly with clean water.
• The original wood colour will be restored.

Note:

Rinse off any accidental splatters or spills from surfaces not meant to be treated. Immediately