ProNature Indoor Maintenance Set with Wax

Coverage & Application

ProNature Wood Cleaner:

• Shake well.
  
• Use mutton cloth or scrubbing pad (for heavy dirt)
  
• Heavy dirt: leave to penetrate for 5-10 minutes
  
• Wipe off with clean water. INDOOR Coverage:
  
• Approximately 20-30 m²/litre per single application on new timber.
• Application rates depend on the substrate, type of processing and surface quality.
• Exact consumption needs to be established with on-site test coat.
  
• For optimum durability apply 3 coats.
• Watch this short video! https://www.pronature.co.za/tips-tricks/
• Product is ready to use.
• Do not dilute. (However, depending on the type of wood,
  thinning the first coat by 10% with ProNature Plant Turpentine may be required.)
  
• Surfaces previously coated: remove all coating by sanding/paint stripper.
  
• Sand the surface to 100 – 150 grit. Remove dust thoroughly.
  
• Stir well with flat paddle until pigments and oil are completely combined. (Shaking won’t do it!)
  
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
  
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth i.e. ProNature Mutton Cloth.
  
• Leave to dry for a minimum of 6 hours and – if necessary – lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
  
• If an additional application with ProNature Wax Balm is desired, allow ProNature Indoor to cure for a minimum of 24 hours before wax application commences.
  
• The finish will take about 7 days to fully cure. Avoid standing water or any other liquids and wet cleaning (only sweeping instead) during this period.
• NB: Cold weather and/or high humidity will prolong the drying process.
  
• Scan QR Code for quick access to this page:
• Product is ready to use.
• Do not dilute. (However, depending on the type of wood,
  thinning the first coat by 10% with ProNature Plant Turpentine may be required.)
• Surfaces previously coated: remove all coating by sanding/paint stripper.
• Sand the surface to 100 – 150 grit. Remove dust thoroughly.
• Stir well with flat paddle until pigments and oil are completely combined. (Shaking won’t do it!)
  
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
  
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth i.e. ProNature Mutton Cloth.
  
• Leave to dry for a minimum of 6 hours and – if necessary – lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
  
• If an additional application with ProNature Wax Balm is desired, allow ProNature Indoor to cure for a minimum of 24 hours before wax application commences.
  
• The finish will take about 7 days to fully cure. Avoid standing water or any other liquids and wet cleaning (only sweeping instead) during this period.
• NB: Cold weather and/or high humidity will prolong the drying process.
  

WAX BALM:

Application:

• Product is ready to use.
  
• Apply 1 – 2 coats (depending on the surface) using a soft, lint-free cloth, i.e. ProNature Mutton Cloth.
•  Can also be used with polishing pad or a floor polishing machine,
• Use product sparingly. Really! “Less is More”.
  
• Allow product to draw into wood for 2-3 minutes.
• Remove surplus with a clean piece of soft cloth or clean polishing pad.
• If a higher sheen finish is desired, apply an additional coat after drying. Wait a minimum of 12 hours between coats.
• Let the wax reach it’s final hardness (at least 24 hours) before polishing for a sheen finish.
  
• Polish the surface thoroughly.